Today is: 2019 Year 6 month 25 Day  Tuesday
Chinese | English
Headquarters address: Yancheng City Liberation Road No. 58 building 19 layer
Phone:+86-15161989891( Ms kelly)
Tel:0086-515-88580266
Fax:0086-515-88580229
E-mail:sales@kingmachine.cn
Web:www.hevadoublet.com
Product
Your position: Home > > Product
Electric dust bag dust comprehensive technical modification
 
Due to environmental standards continue to improve, many in the service of the electric dust collector has been unable to meet the new requirements of dust emissions, especially a lot of dust collector using dry desulfurization, flue gas discharge is not compliance. Electric change bag is an inevitable choice for the user.
Scheme and key points:
1, using the spray pulse bag filter technology in the electric precipitator into existing pulse long bag type dust collector;
Bag type dust collecting unit 2 to retain the original of the electric dust collector base and shell import and export, ash and ash discharge system and transformed into the;
3, removal of top the original collector box, high voltage power supply, internal cathodic system, vibration device, import part flow layout;
Special filter 4, which is suitable for conditions of flue gas dust resistance, guarantee;
5, a bag dust collector box, flower plate, spray top device, bag, bag cage, the import of flue local transformation;
6 to replace the exhaust fan to ensure the system resistance
Reconstruction after spray pulse bag filter technology parameters:

Quantity of flue gas

420000m³/h(150℃) resistance of the equipment <1700Pa
 inlet gas temperature Normal150℃;Abnormal260℃(Instantaneous Design of filtration velocity 0.97m/min
 Entrance dust concentration ≦100Nm³ Total filtration area

7160m²

 Flue gas composition raw mill and kiln tail gas Pulse cleaning gas pressure 0.3-0.6Mpa

Export concentration

<10mg/Nm³ Compressed air consumption ~3.5Nm/min

The original electrostatic dust technology parameters:

Model

26/12.5/3×8/0.4  
Quantity of flue gas 324000m³/h(120℃) Electric field area 121m²
 inlet gas temperature Normal120℃;Abnormal300℃(nstantaneous) Flue gas composition raw mill and waste gas of kiln tail
 Entrance dust concentration ≦10mg/Nm³

Export volume concentration

<100mg/Nm³
An article:Cylinder type converter gas dry (LT) ESP Next:Electric bag composite dust collector 
Home | About Us | News | Products | Case | Human resources | Network | Customer Service
Copyright:Jiangsu Tandge Environmental Engineering Co., Ltd.
Headquarters address: Yancheng City Liberation Road No. 58 building 19 layer Phone: +86-15161989891(Ms kelly)
欧美特级限制片2017